How to use the siding calculator
- Add up the length of every wall you are siding and enter the wall height.
- Enter the number of gables with their base width and height to the peak.
- Count doors, windows and garage doors. Typical sizes are used for the deduction.
- Keep about 10% extra for cuts and overlaps.
Formula
Wall area = total wall length × wall height
Gable area = number of gables × base width × height ÷ 2
Net area = wall area + gable area − openings (20 sq ft per door, 15 per window, 112 per garage door)
Squares = net area ÷ 100 × (1 + waste). Boxes = squares ÷ 2, rounded up.
Worked example
Walls totaling 160 ft at 9 ft high are 1,440 sq ft. Two gables 30 ft wide and 8 ft high add 240 sq ft. Two doors and ten windows remove 190 sq ft, leaving 1,490 sq ft. With 10% waste you need 16.39 squares, or 9 boxes of vinyl siding.
Tips before you buy
- A square of siding covers 100 square feet of wall. Many vinyl siding products are packed about two squares per box, but check yours.
- If your openings are much larger than average, measure them and adjust the counts so the deduction stays realistic.
- Trim, J-channel, corner posts and soffit are bought by the piece. Measure them separately.
- Use 15% waste if the house has many corners, bump-outs or a complicated layout.
Frequently asked questions
How many squares of siding do I need?
Find the net wall area in square feet, divide by 100, and add about 10% for waste.
How do I calculate the area of a gable?
A gable is a triangle: multiply the base width by the height to the peak and divide by 2.
Should I subtract windows and doors?
Yes, but only standard-size openings. Many installers skip small windows and count that area as extra waste.
How many squares are in a box of vinyl siding?
Usually about two squares, but it depends on the product and profile.
Last updated: