Asphalt Calculator

Estimate how many tons of asphalt you need to pave a driveway, parking pad, or path. Asphalt is priced by the ton, so knowing the tonnage helps you compare quotes and spot estimates that look too high or too low.

Your measurements

ft
ft
in
lb/ft³
$

Results

Asphalt needed18.13tons
Volume9.26 cubic yards
In cubic feet250 cu ft
Paved area1,000 sq ft

Estimate only. Quantities are rounded up. Check product labels, your supplier and local building code before you buy or build.

How to use the asphalt calculator

  1. Enter the length and width of the area in feet.
  2. Enter the compacted thickness in inches.
  3. Leave density at 145 lb per cubic foot, a common figure for compacted hot mix, unless your contractor gives another value.
  4. Add a price per ton to get an estimated material cost.

Formula

Volume (cu ft) = length (ft) × width (ft) × thickness (in) ÷ 12

Tons = volume (cu ft) × density (lb/ft³) ÷ 2,000

Worked example

A 50 × 20 ft driveway paved 3 inches thick has a volume of 250 cubic feet. At 145 lb per cubic foot that is 36,250 lb, or about 18.13 tons of asphalt.

Tips before you buy

  • Residential driveways are commonly paved 2–3 inches thick over a compacted gravel base. Heavier traffic needs a thicker section.
  • Thickness matters most: going from 2 to 3 inches adds 50% more asphalt.
  • Plants usually load trucks by the ton, so round up to avoid running short at the edges.
  • The base is a separate cost. Use the gravel calculator to estimate base stone.

Frequently asked questions

How many tons of asphalt do I need for a driveway?

Multiply length × width × thickness in inches ÷ 12 to get cubic feet, then multiply by 145 and divide by 2,000. A 1,000 sq ft driveway at 3 inches needs about 18 tons.

How much does a ton of asphalt cover?

At 145 lb per cubic foot, one ton covers about 55 square feet at 3 inches thick, or about 83 square feet at 2 inches.

What thickness should a residential driveway be?

Two to three inches of compacted asphalt over a well-compacted base is common. Check with a local paving contractor for your soil and traffic.

Is asphalt density always 145 lb per cubic foot?

It varies with the mix and compaction, roughly 140–150 lb per cubic foot. 145 is a common estimating figure.

Last updated: