Roofing Calculator

Measure your roof from the ground. Enter the length and width of the house, the eave overhang, and the roof pitch, and the calculator converts the flat footprint into the real sloped roof area, roofing squares, and shingle bundles.

Your measurements

ft
ft
in
%
$

Results

Roofing squares to order16.53squares
Roof surface area1,503 sq ft
Squares before waste15.03 squares
Shingle bundles (3 per square)50 bundles
Pitch multiplier1.118 ×

Estimate only. Quantities are rounded up. Check product labels, your supplier and local building code before you buy or build.

How to use the roofing calculator

  1. Measure the outside length and width of the house in feet.
  2. Enter the eave overhang in inches (12 inches is common).
  3. Pick the roof pitch: the rise in inches for every 12 inches of run.
  4. Add 10% waste for a simple gable roof and more for hips, valleys and dormers.

Formula

Footprint with overhang = (length + 2 × overhang) × (width + 2 × overhang)

Pitch multiplier = √(1 + (rise ÷ 12)²)

Roof area = footprint × pitch multiplier. Squares = roof area ÷ 100. Bundles = squares × 3.

Worked example

A 40 × 30 ft house with a 12-inch overhang has a 42 × 32 ft footprint (1,344 sq ft). A 6/12 pitch has a multiplier of 1.118, so the roof surface is about 1,503 sq ft, or 15.03 squares. With 10% waste you need 16.53 squares, which is 50 bundles of shingles.

Tips before you buy

  • A roofing square is 100 square feet of roof. Most asphalt shingles come three bundles to the square.
  • For the same pitch on every face, gable and hip roofs have the same area, but hips create more waste. Use 15% waste or more on complex roofs.
  • Not sure of the pitch? Hold a level horizontally against a rafter, measure 12 inches along it, then measure straight up to the roof. That height is the rise.
  • Dormers, porches and attached garages are separate roof sections. Calculate them separately and add them up.

Frequently asked questions

How do I calculate roof squares?

Find the sloped roof area in square feet and divide by 100. The calculator does this from your house size and pitch.

What is a pitch multiplier?

It converts flat footprint area into sloped roof area. It equals the square root of 1 + (rise ÷ 12)². A 6/12 roof is 1.118, an 8/12 roof is 1.202, and a 12/12 roof is 1.414.

How many bundles of shingles are in a square?

Most three-tab and architectural shingles are packed three bundles per square. Some heavy designer shingles use four or five, so check the wrapper.

How much waste should I add for roofing?

Around 10% for simple gable roofs and 15% or more for roofs with hips, valleys and dormers.

Last updated: